Blog
Short, plain-language reads on boomy bass, small rooms, and studio monitors.
4 min read
ADAM T5V and T7V settings and placement
Leave LF and HF at 0 if the speakers sit 16 inches or more from walls. Closer than that, set LF to -2 dB. Use HF only for a dull or bright room, and keep the level knob at 0 dB.
4 min read
Do you need bass traps in a small home studio?
They help with boomy bass if they're thick and sit in the corners, and a small room needs several. Thin foam won't touch the boom.
3 min read
Is there a plug-in that fixes an untreated room?
A plug-in can turn down the bass notes your room exaggerates. It can't remove echo or bring back notes the room cancels.
4 min read
JBL 305P MkII boundary EQ, HF trim and placement
Use 0 dB on stands away from walls, -1.5 dB on a desk near a wall, and -3 dB right against a wall or in a corner. Leave HF Trim at 0 unless your room is bright or dull.
4 min read
Kali LP-6 DIP switch settings for every placement
Switches 1 to 3 tell the speaker where it sits, from all down on stands away from walls to all up on a desk against a wall. 4 and 5 trim the bass, 6 and 7 the treble, 8 turns on RCA.
5 min read
KRK Rokit G4 and G5 EQ settings for your room
Start with LOW EQ and HIGH EQ at 3 (flat). On a desk near a wall, try LOW EQ 2. Use 1 for a wall or corner and 4 for a muddy desk. Skip 5 if your room already booms.
4 min read
Room modes in plain English
A room mode is a bass note that fits between two of your walls, so it gets louder and rings longer. You can work out yours from your room's size.
4 min read
Yamaha HS8, HS7 and HS5 room control settings
Start both switches at 0. Use ROOM CONTROL -2 on a desk near a wall and -4 in a corner, then check by ear. HIGH TRIM is for a bright or dull room, not for boom.
2 min read
Can you mix in an untreated room?
Yes. Most home studios are untreated. Set up carefully, check your mixes on other speakers, and deal with the bass your room exaggerates.
2 min read
Rear-ported monitors near a wall
Monitors with a hole in the back get extra bass when they sit close to a wall. Give them space, use the back-panel switch, and plug the port if you must.